使用安徽槽式電纜橋架的環境通常具有腐蝕性。因此，線槽電纜橋架應采用防腐處理或耐腐蝕材料制成。這樣，可以延長槽式電纜槽的使用壽命并節省資金。如果線槽電纜橋架用于有防火要求的區域，應注意防火。具體方法是在電纜梯架和托盤上添加耐火材料，形成半封閉結構或封閉結構，并在托盤和托盤支架表面涂防火涂料，可提高整個設施的耐火性能，使其使用更。此外，應注意不要在防火要求高的環境中使用鋁電纜橋架。當需要平行敷設電纜槽時，必須計算距離，以便在設備故障時進行維護。

The environment where Anhui trough type cable trays are used is usually corrosive. Therefore, cable trays for cable trays should be made of anti-corrosion treatment or corrosion-resistant materials. In this way, the service life of the trough type cable tray can be extended and funds can be saved. If the cable tray is used in areas with fire protection requirements, attention should be paid to fire prevention. The specific method is to add refractory materials to the cable ladder and tray to form a semi enclosed or enclosed structure, and apply fireproof coating on the surface of the tray and tray support, which can improve the fire resistance performance of the entire facility and make its use safer. In addition, attention should be paid not to use aluminum cable trays in environments with high fire protection requirements. When parallel cable trays need to be laid, the distance must be calculated for maintenance in case of equipment failure.

槽式電纜橋架的敷設方向應盡可能短、快，并盡可能沿墻壁和其他固定建筑物敷設應該考慮技術、管道和電力的協調。便于預留墻體孔洞、樓板和吊架安裝所需的預埋鋼板位置。隱藏在地下的金屬線槽布線應與土建密切配合設計，提前合理確定線路和設備選擇。線槽電纜橋架在設計位置時，應均勻分布計算

The laying direction of trough type cable trays should be as short and fast as possible, and should be laid along walls and other fixed buildings as much as possible, taking into account the coordination of technical, pipeline, and electrical specialties. Convenient for reserving pre embedded steel plate positions for wall openings, floor slabs, and suspension installation. The wiring of metal wire ducts hidden underground should be designed in close coordination with civil engineering professionals, and the selection of circuits and equipment should be determined in advance and reasonably. When designing the position of the cable tray, it should be evenly distributed and calculated

則安徽槽電纜橋架不應與下列管道平行敷設。如果槽式電纜橋架與含有腐蝕性液體的管道相遇，電纜橋架應敷設在管道上方槽電纜橋架應敷設在熱力管道下方。對于易燃易爆氣體管道，如果管道中的氣體比空氣重，電纜槽應在管道上方，如果管道中的氣體比空氣輕，電纜槽應在管道下方

The cable tray of Anhui trough should not be laid parallel to the following pipelines. If the trough type cable tray meets a pipeline containing corrosive liquids, the cable tray should be laid above the pipeline. The trough cable tray should be laid below the thermal pipeline. For flammable and explosive gas pipelines, if the gas in the pipeline is heavier than air, the cable tray should be above the pipeline. If the gas in the pipeline is lighter than air, the cable tray should be below the pipeline

其次，橋架系統應具有可靠的電氣連接，并應接地。對于振動場所，應在接地部分的連接處安裝彈簧圈。

Secondly, the bridge system should have reliable electrical connections and should be grounded. For vibration locations, spring coils should be installed at the connection of the grounding part.

不同電壓應用的電纜應敷設在不同層的電纜橋架內

Cables with different voltage applications should be laid in cable trays of different layers

提到了槽式電纜橋架，這可能對每個人來說都有點陌生，但槽式電纜橋架在電力行業應用廣泛。槽式電纜橋架是由整塊鋼板彎曲而成，具有一定的密封性和深度。

When it comes to trough cable trays, it may seem unfamiliar to everyone, but trough cable trays are widely used in the power industry. The trough type cable tray is formed by bending a whole steel plate, which has a certain degree of sealing and depth.

本文由山東電纜橋架提供技術支持，更多的詳細精彩內容請點擊我們的網站   http://www.qcxzyz.com，我們將會全心全意為您提供滿意的服務。

This article is supported by Shandong cable tray technology. For more detailed and exciting content, please click on our website http://www.qcxzyz.com We will wholeheartedly provide you with satisfactory service.